Project operation cooperation

Group News

Tightening the "Safety String" and Building a Strong "Protection Net" | Tongyong Environmental Protection Group Successfully Conducts Special Safety Training on Workshop Loading and Unloading Operations

2026-10-27



To further strengthen workshop safety production management and comprehensively enhance frontline employees' safety awareness and standardized operational skills, on October 24, the Production Department of Tongyong Environmental Protection Group organized a special safety training session on workshop loading and unloading operations. The training was lectured by Wang Fengxin, head of the Production Department. All workshop employees attended the training and completed a theoretical test on the spot immediately afterward, using the test to promote learning and effectively internalizing safety regulations in mind and externalizing them in action.















Always Sound the Alarm: Learn from Cases and Strictly Observe the Safety Red Line



At the beginning of the training, Wang Fengxin, head of the Production Department, conducted an in-depth review of typical forklift accident cases, visually analyzing the painful lessons caused by violations such as unlicensed operation, speeding, and failure to observe surroundings. In conjunction with the already implemented national standard Classification and Coding of Production Safety Accidents (GB 6441—2025), the meeting detailed the high-frequency risks and main consequences of loading and unloading operations, including vehicle-related injuries within the factory, lifting injuries, object strikes, mechanical injuries, and falls from height, sounding a safety alarm for all employees.




Focusing on Key Points: Hardcore Standards for Forklifts and Lifting Operations



As loading and unloading operations are a top priority in workshop safety management, the training set extremely strict standard requirements for special equipment operations:

"Daily Eight Checks" and "Eight Prohibitions" for Forklift Operations: 

Before driving, the "Eight Checks" must be implemented item by item. If any item fails, driving with defects is strictly prohibited. At the same time, the "Eight Prohibitions" operational red lines must be strictly observed.

"Ten No-Lifting" Principle for Lifting Operations:

Regarding lifting operations, the meeting reiterated the core "Ten No-Lifting" principle, emphasizing the trial lifting process and key points for inspecting wire ropes and rigging to ensure the entire lifting process is foolproof.

At the same time, in response to high-frequency risks in loading and unloading operations such as mixed pedestrian and vehicle traffic, cargo tipping and sliding, and vehicle blind spots, the training explicitly required warning isolation in operational areas, separation of pedestrians and vehicles, and stable, height-limited, and tip-over-resistant cargo stacking.



Standardizing Details: Manual Handling and General Safety Points


In addition to large mechanical equipment, daily manual handling and general protection cannot be overlooked either:

Scientific Handling Standards: 

Clear limits for individual load-bearing were defined, the standard "Five-Step Method" for correct handling posture was promoted, and requirements for multi-person collaboration were strictly standardized.

Comprehensive PPE Protection: 

All employees are required to strictly wear labor protection equipment such as safety helmets, anti-smash safety shoes, reflective vests, and protective gloves.

Four-Step Emergency Response Method:

Emergency response steps for sudden dangerous situations were explained in detail, comprehensively enhancing all employees' ability to respond to emergencies.


Using Tests to Promote Learning: On-the-Spot Test to Verify Training Effectiveness


To ensure the training content is truly understood and remembered, after the training, the workshop organized all attendees to take a theoretical test on the spot. Everyone thought carefully and answered calmly, using the test to promote learning and learning to promote action, truly achieving the good training effect of "everyone talks about safety, everyone knows emergency response."


Safety in production is never an empty slogan, but the highest reverence for life, the steady happiness of every family, and the foundation for an enterprise to achieve steady and long-term development.

For Tongyong Environmental Protection Group, which is committed to green development, "green" is our solemn commitment to the outside world, while "safety" is our internal responsibility. This special training was not only a tempering of business skills but also a deep planting of safety culture.

In the future, we will continue to use the caution of treading on thin ice and the work style of leaving a mark when grasping iron, pressing safety responsibilities down to every position and every detail, building a stronger safety foundation, and escorting the company's high-quality development!


视频号关注开云足球

抖音号关注开云足球

供 稿 | 生产部

编 辑 | 沈昕怡 季长宝

审 核 | 张铭尹

Prev：Master and Apprentice Join Hands to Pass on Crafts…

Next：Wisdom Gathers at Tonghuan, Together Cultivating G…

Back

Related recommendations

Master and Apprentice Join Hands to Pass on Crafts…